Ice Maintenance Workshops-1 & 3 day courses
Gary Vansickle, President of I.C.E. is an ice maintenance instructor for Recreation Connections Manitoba. He's travelled extensively to provide invaluable workshops to arena participants. There is a definite need for this information which has been proven by the excellence in our workshop feedback. As was quoted in the Kivalliq News by Simon Adams, Manager of
Trouble Shooting & Operational Tips for the Mark IV Ice Painter
Before starting up the Mark IV - check oil level in crank case - fill gas tank with fresh gas Care of Pump DO NOT start the motor and run the system without having water in the centrifugal pump. Doing so can burn out the pump. The best way to charge the pump is: - Fill the tank to a
How to Use Freeze-in Pins
Freeze-In Pins Freeze-in Pins work best when they are melted into the ice. This procedure should be used when setting the goal frames for the first usage of the day. Place the Steel Freeze-in Pins in a container of hot water. Remove Pins from water. Insert Pins into goal frame. Set the frames in proper location on goal
Ice Installation Overview
Pre-installation 2 months prior to ice installation do a complete inspection of your board, glass and equipment. This will allow you time to order any supplies you need to do repairs or upgrades. Do a thorough cleaning of the concrete floor to assure you have a clean surface with no contaminants for your ice to